Stages Power L - Stages Carbon for SRAM, RaceFace, Easton BB30 Gen3
New 2018 version of the Stages Gen3 power meter!
The Stages Power meter is built to the proprietary Stages Power carbon left crank arm. The full carbon fiber Stages Power meter and crank arm is directly compatible (no additional components needed) with 386EVO drive side cranks.
It can be retrofitted to SRAM Red 22, Force 22 and Rival 22 BB30 road and SRAM Mountain (168mm Q) BB30, as well as select Truvativ and Easton EC90 SL, drive side cranks using the Stages spindle. Now there is also a spindle for Race Face Next SL cranks.
Simply select your crank set. We'll deliver your power meter with the proper spindle.
This new Stages Power meter does not work with SRAM GXP cranks.
Since the power meter is placed on the inside of the crank arm, a clearance of at least 10mm between crank and chain stay / direct-mount brake is needed. Especially bikes with direct-mount brakes may cause problems.
To ensure your bike is compatible with the Stages Power Meter, please perform a simple check with a 10mm hex key:
left crank arm
adds 15gr to left crank arm
200+ hours (CR2032)
ANT+, Bluetooth Smart Ready
Training Peaks, Strava, Garmin Training Center and others
Power Range (Watts):
0 to 2500
Cadence range (rpm):
FSA 386Evo Modelle + SRAM BB30 Red 22, Force 22, Rival 22 und SRAM BB30 MTB (168Q), Easton EC90 SL + Race Face Next SL
165, 170, 172.5, 175mm
Active temperature compensation
Accelerometer based cadence measurement
In the pack
✔ Stages power L Gen3 ✔ Left crank arm ✔ Spindle (only comes with Race Face or SRAM versions) ✔ Battery ✔ Manual