New 2018 generation 3 with improved housing and lower profile!
The Gen 3 Stages Power L - Campagnolo Super Recordpower meters is positioned discretely on the inner side of the left crank arm, weighing in at a mere 15g. It's accurate (±1.5%) and easy to install. Stages power meter always come mounted to the left crank arm. So all you have to do is find the model, which is compatible with your existing crank set and simply swap the left crank arm. Stages Power has a wide range of adaptation over the bike industry's aluminum crank models.
This meter comes ready to bolt on, including Campagnolo’s Ultra-Torque non-drive bottom bracket bearing.
Since the power meter is placed on the inside of the crank arm, a clearance of at least 10mm between crank and chain stay / direct-mount brake is needed. Especially bikes with direct-mount brakes may cause problems.
To ensure your bike is compatible with the Stages Power Meter, please perform a simple check with a 10mm hex key:
left crank arm
adds 15gr to left crank arm
200+ hours (CR2032)
ANT+, Bluetooth Smart Ready, NFC
Training Peaks, Strava, Garmin Training Center and others
Power Range (Watts):
0 to 2500
Cadence range (rpm):
Campagnolo Super Record
170, 172.5, 175mm
Active temperature compensation
Accelerometer based cadence measurement
In the pack
✔ Stages Power L ✔ Left ccrank arm Campagnolo Super Record incl BB-bearing ✔ Battery ✔ Manual